Dell displays have a power conservation option that automatically shuts off your monitor while your computer is not in use. In contrast, this feature might help you save money on electricity and keep your monitor in good condition. It can also be annoying if your display is constantly in power save mode.
Continue reading to find out how to address and prevent problems with power save mode. This article will show you how to get Dell monitor out of power save mode.
What Does Power Save Mode Mean on Dell?
When a computer does not use for an extended period, the monitor enters power-saving mode. If your Dell computer is in Power Saving Mode, it conserves power by running critical processes and shutting down non-essential ones.
The screen will dim, and the computer will run more slowly under Dell power save mode black screen. Simply hit the computer’s power button to exit Power Saving Mode.
If you want to know why is my Dell powering on but no display? The most common reason is the faulty connection between graphics drivers and the operating system. But display adapter driver upgrades, device overheating, viruses in the system, hardware failure, and power supply issues can all contribute to the black screen.
How Do I Get My Monitor Out of Power Save Mode?
If your Dell monitor is in power saving mode, do these simple Dell Monitor Stuck in Power Save Mode Fixes to get out of it.
Method#1: What to Do If Dell Computer Entering Power Save Mode on Startup?
If your Dell monitor boots into Power Save Mode, it could be due to a malfunctioning RAM stick or motherboard battery. To resolve the problem, try removing and reconnecting the RAM sticks or replacing the CMOS battery. Here are the steps:
Case#1: Connect the RAM Sticks Again
- Make sure your computer is shut down and no cable is plugging in.
- Remove the case panel by unscrewing it.
- Once you open the motherboard, remove the RAM modules by firmly pressing the tabs on the side of the DIMM slots.
- Using a dry cotton swab, clean the RAM modules.
- After that, gently insert the RAM modules back into the slots.
- Reboot your computer. Hopefully, the problem resolves.
Case#2: Change the CMOS Battery
- Locate the battery on the motherboard by opening the computer case.
- Check to see if it is detachable. If it is not detachable, you should contact the manufacturer. If it is kept in place by a metal clip, slip it out from under the clip to remove it.
- After removing the battery, list its specifications, including the brand, voltage, wiring, etc.
- Replace your battery.
- Once it’s secure, connect the remainder of the cables to their respective ports and power on the computer.
- Then, reset all CMOS values to default and check whether the Power Save Mode problem solves.
Method#2: What to Do If Dell Monitor Entering Power Save Mode HDMI?
- If the power cable and socket are fine, examine the HDMI or display cable you use to connect to your monitor.
- Replace the current HDMI cable with a new one.
If the problem is with the HDMI cable, replace it. After that your Dell monitor will exit power save mode.
Power saving mode increases the battery life of your mobile device by removing features and restricting CPU usage.
If you don’t have power, unplug the computer, press the power button for about 30 seconds, then plug it back in and try again. If it fails, a second power cable may be necessary.