When your computer boots up, the error notice USB device over current status detected appears. It is a BIOS error. This error follows by the system unit turning off automatically after 15 seconds. If you experience this error, the machine immediately shuts down.
The operating system is trying to protect your motherboard from worsening existing harm. Most of these mistakes are hardware-related, such a qualified technician might need. However, if you feel confident messing around with your computer’s parts, I’ve outlined some potential fixes.
Your USB devices are the sole cause of the USB device over current state detected issue. A circuit overload issue could be affecting your USB devices. Although it may make you uncomfortable to hear, this error is present to prevent additional harm to your computer system.
The message means that a USB device disable by the computer due to an overloading circuit. These are some of the causes: A USB gadget broke. In your computer, a jumper is missing. Drivers for your USB devices need to be updated.
How To Fix USB Device Over Current Status Detected? [Easy Ways]
This error message can resolve in several ways. You can attempt the solutions for the different situations I’ve provided below. Let’s see USB device over current status detected how to fix it:
It always advises starting with simple solutions when trying to solve any problem. Before attempting complex solutions, you must ensure that all the linked devices to your computer are operational. However, you may do this by unplugging and replugging each linked USB device.
However, by verifying that the front USB ports are active, changing the BIOS, looking for any missing jumpers, replacing the Motherboard, etc., you can resolve the USB device over current status detected will shutdown in 15 second’s error.
The BIOS system, a firmware used to handle hardware initialization during your computer’s booting process, is preinstalled on your computer by the manufacturer. You can attempt to remove the USB device over the current status detected error by updating your BIOS.
A missing jumper is another cause of your computer’s refusal to boot and logging of the error message. The primary means by which the USB connector connects to your motherboard are jumpers. You will see the error message if any jumpers are broken or missing.
Make sure that all the connectors’ jumpers are complete and undamaged by inspecting each one. Any that are missing can quickly replace.
If you are using a new motherboard in your system for the first time, you should be aware of the risk that it is malfunctioning and has caused the modules to become corrupted.
Return to the support center to see what they can do if your motherboard still covers by warranty. You’ll likely get a complete exchange. Additionally, you can switch out the motherboard or connect a temporary substitute. This one will assist in determining whether or not each component in your computer is operating correctly.
I advise you to use the Restore Repair Tool after failing each technique. It will scan the repository and replace any missing or damaged files that find. When the issue shows a mechanism going wrong, this fix usually works. Restore will also optimize your machine for maximum performance.
If I am facing USB device over current status detected Kenwood error. My first thought about it is that one of the cables is damaged. Or that the circuit inside the radio responsible for current sensing has failed if neither USB port has anything inserted into it and neither is debris-free. The simplest method to figure out what’s going on would be to unplug the USB cord from the radio’s back and check whether the problem still exists. If it disappears, the problem is with the cable harness, and you can get a new one from Kenwood’s parts supplier. The radio is at fault. If the problem still exists with the cable harness, then unplug it.
Overload, improper design, arc faults, ground faults, and short circuits are potential causes of Overcurrent safety systems like fuses, circuit breakers, and current limiters frequently utilize to reduce the danger.
A short circuit is an overcurrent that significantly exceeds the circuit’s typical full-load current. As its name suggests, a short circuit s deviates from the circuit’s typical current-carrying path to bypass the load and return to the power source. While a short circuit is not an overload, it is an overcurrent.